Orbit Base Kit
ORBIT BASE STATION
Key features
-Creates footage smoother than a gimbal.
-Silent, track free, vibration free camera movement.
-Perfect parallax.
-Ideal for filming products, interviews, or yourself!
Base Kit Included
(1) Axibo Powered Stealth Motor.
- Internal 6700mAh battery.
- 8 hour run time.
- Max 10 RPM / Min 1 Rotation per 48 hours.
- Machined and welded motor shaft, vertical weight tested over 200 lbs.
(1) Ceiling Plate with hardware assembly. Mounts into Studs/ joists, or cement ceilings. Includes screws.
(1) Telescoping Down Rod. Attaches to ceiling Plate and to Orbit Motor with an adjustable hight of 27” - 46” . Ideal use for ceilings 8-12’
(2) Kondor Blue Arm joints. Anodized 6160-t6 aluminum, with arri rosette steel teeth.
(4) Anodized Black aluminum arm poles. (2) 24” and (2) 16 inch. Total span across when assembled 94”.
(2) Threaded end caps with 1/4-20 mounting for accessories or counter weights. Caps thread into arm poles.
(1) Dual Arm receiver. Includes bubble level for proper weight distribution.
(3) 1 lbs counter weights. 1/4-20 threaded, stainless steel construction.
(1) Ball Head to cold Shoe mount. Fits to normal DSLR or Mirrorless cameras such as Sony, Canon, Panasonic.
(1) 1/4-20 to Cold Shoe Mount. Mounts to any camera with 1/4-20 mount, and creates a quick release cold shoe.
(1) Bar Sleeve. 1/4-20 mount, attaches to ball head and camera.
(2) Hook and loop wall anchors for leveling down rod.
(2) 1/4-20 threaded loops. Used for attaching ratchet straps and straightening down rod, (if needed).
(2) Ratchet straps. 75 LBS max payload.
(1) Aluminum IR Remote control + APP (App release summer 2022)
Motor Modes Explained
Product Mode, visor Green. Max speed, 10RPM. Very fast Orbits, great for slow motion shots.
Interview mode, visor yellow. Slower than green mode, 1/10 RPM, ideal for interviews or for slow product shots with long lenses.
Time lapse mode, visor teal. Very slow gear, 1 rotation every 48 hours, great for shadows play time lapse or plants growing etc..
Stop Motion Mode, visor blue. Orbit only moves when given instructions to do so, moves in degrees.
Wiper Mode, visor blinks any color - Orbit jogs back and forth between two positions. Ideal for interviews with long lenses and low speeds.
VFX Mode. Orbit has built in speaker, and will beep exactly as each orbit concludes. Ideal for stacking and performing movie magic.
+FREE SHIPPING USA
International orders from outside the U.S. will ship from factory direct and will require an air shipping fee. All taxes and duties on international orders will need to be paid by the buyer at time of delivery.
Please keep in mind that international customers are required to pay collect on taxes and duties. Click here for more information.
ORBIT BASE STATION
Key features
-Creates footage smoother than a gimbal.
-Silent, track free, vibration free camera movement.
-Perfect parallax.
-Ideal for filming products, interviews, or yourself!
Base Kit Included
(1) Axibo Powered Stealth Motor.
- Internal 6700mAh battery.
- 8 hour run time.
- Max 10 RPM / Min 1 Rotation per 48 hours.
- Machined and welded motor shaft, vertical weight tested over 200 lbs.
(1) Ceiling Plate with hardware assembly. Mounts into Studs/ joists, or cement ceilings. Includes screws.
(1) Telescoping Down Rod. Attaches to ceiling Plate and to Orbit Motor with an adjustable hight of 27” - 46” . Ideal use for ceilings 8-12’
(2) Kondor Blue Arm joints. Anodized 6160-t6 aluminum, with arri rosette steel teeth.
(4) Anodized Black aluminum arm poles. (2) 24” and (2) 16 inch. Total span across when assembled 94”.
(2) Threaded end caps with 1/4-20 mounting for accessories or counter weights. Caps thread into arm poles.
(1) Dual Arm receiver. Includes bubble level for proper weight distribution.
(3) 1 lbs counter weights. 1/4-20 threaded, stainless steel construction.
(1) Ball Head to cold Shoe mount. Fits to normal DSLR or Mirrorless cameras such as Sony, Canon, Panasonic.
(1) 1/4-20 to Cold Shoe Mount. Mounts to any camera with 1/4-20 mount, and creates a quick release cold shoe.
(1) Bar Sleeve. 1/4-20 mount, attaches to ball head and camera.
(2) Hook and loop wall anchors for leveling down rod.
(2) 1/4-20 threaded loops. Used for attaching ratchet straps and straightening down rod, (if needed).
(2) Ratchet straps. 75 LBS max payload.
(1) Aluminum IR Remote control + APP (App release summer 2022)
Motor Modes Explained
Product Mode, visor Green. Max speed, 10RPM. Very fast Orbits, great for slow motion shots.
Interview mode, visor yellow. Slower than green mode, 1/10 RPM, ideal for interviews or for slow product shots with long lenses.
Time lapse mode, visor teal. Very slow gear, 1 rotation every 48 hours, great for shadows play time lapse or plants growing etc..
Stop Motion Mode, visor blue. Orbit only moves when given instructions to do so, moves in degrees.
Wiper Mode, visor blinks any color - Orbit jogs back and forth between two positions. Ideal for interviews with long lenses and low speeds.
VFX Mode. Orbit has built in speaker, and will beep exactly as each orbit concludes. Ideal for stacking and performing movie magic.
+FREE SHIPPING USA
International orders from outside the U.S. will ship from factory direct and will require an air shipping fee. All taxes and duties on international orders will need to be paid by the buyer at time of delivery.
Please keep in mind that international customers are required to pay collect on taxes and duties. Click here for more information.
ORBIT BASE STATION
Key features
-Creates footage smoother than a gimbal.
-Silent, track free, vibration free camera movement.
-Perfect parallax.
-Ideal for filming products, interviews, or yourself!
Base Kit Included
(1) Axibo Powered Stealth Motor.
- Internal 6700mAh battery.
- 8 hour run time.
- Max 10 RPM / Min 1 Rotation per 48 hours.
- Machined and welded motor shaft, vertical weight tested over 200 lbs.
(1) Ceiling Plate with hardware assembly. Mounts into Studs/ joists, or cement ceilings. Includes screws.
(1) Telescoping Down Rod. Attaches to ceiling Plate and to Orbit Motor with an adjustable hight of 27” - 46” . Ideal use for ceilings 8-12’
(2) Kondor Blue Arm joints. Anodized 6160-t6 aluminum, with arri rosette steel teeth.
(4) Anodized Black aluminum arm poles. (2) 24” and (2) 16 inch. Total span across when assembled 94”.
(2) Threaded end caps with 1/4-20 mounting for accessories or counter weights. Caps thread into arm poles.
(1) Dual Arm receiver. Includes bubble level for proper weight distribution.
(3) 1 lbs counter weights. 1/4-20 threaded, stainless steel construction.
(1) Ball Head to cold Shoe mount. Fits to normal DSLR or Mirrorless cameras such as Sony, Canon, Panasonic.
(1) 1/4-20 to Cold Shoe Mount. Mounts to any camera with 1/4-20 mount, and creates a quick release cold shoe.
(1) Bar Sleeve. 1/4-20 mount, attaches to ball head and camera.
(2) Hook and loop wall anchors for leveling down rod.
(2) 1/4-20 threaded loops. Used for attaching ratchet straps and straightening down rod, (if needed).
(2) Ratchet straps. 75 LBS max payload.
(1) Aluminum IR Remote control + APP (App release summer 2022)
Motor Modes Explained
Product Mode, visor Green. Max speed, 10RPM. Very fast Orbits, great for slow motion shots.
Interview mode, visor yellow. Slower than green mode, 1/10 RPM, ideal for interviews or for slow product shots with long lenses.
Time lapse mode, visor teal. Very slow gear, 1 rotation every 48 hours, great for shadows play time lapse or plants growing etc..
Stop Motion Mode, visor blue. Orbit only moves when given instructions to do so, moves in degrees.
Wiper Mode, visor blinks any color - Orbit jogs back and forth between two positions. Ideal for interviews with long lenses and low speeds.
VFX Mode. Orbit has built in speaker, and will beep exactly as each orbit concludes. Ideal for stacking and performing movie magic.
+FREE SHIPPING USA
International orders from outside the U.S. will ship from factory direct and will require an air shipping fee. All taxes and duties on international orders will need to be paid by the buyer at time of delivery.
