Cinema Arm Kit
The new Cinema Arm Kit enables you rig up larger cameras and heavier counterweights to the Orbit using a standard 1 1/4 inch speed rail in place of the Orbit arms. This means that you can capture larger objects such as groups of people, cars, furniture, landscapes and more. Better yet mount the camera way out with a long lens and shoot tight to capture mind blowing parallax! Take it all outside with a 50-100 ft slackline and capture footage that even CGI couldn’t create. 1” inch weight plates, camera and speed rail are not included with kit.
The Kit includes:
(1) Lower receiver for a 1-1/4” inch speed rail- (Speed rail not included, can be sourced at local industrial metal supply shops)
(1) Speed rail collar and cheese plate.
(1) Counterweight Collar and Lock Nut - Uses conventional gym weights as counter weight (Gym weights not included)
(1) Block Bearing- Mounts to down rod to support longer heavier arms during operation.
This Kit does NOT include the following.
2”x50’ Slackline, We recommend a slackline of 50ft, NOT 100ft as seen in video. You can find one here - https://amzn.to/3npJhKO
Speed Rail. The speed rail required to fit the components is 1-1/4” (Schedule 40 with 1.66 OD). You can find 20ft sections at most any North American Industrial Metal Supply shops for around $100-$140 per 20ft section. We recommend cutting into two 10ft sections and using a coupler.
Speed Rail Coupler - We are still designing one that works better, but for now this one works. https://www.ebay.com/itm/124740103812
Single Outdoor bracket plate with knob. Outdoor kits are sold separately and already included in the Pro Kits)
If you need a single plate and not the entire outdoor kit, contact Jon@marblorbit.com for special package.
