Orbit Studio Kit - Kondor Blue Launch Edition
ORBIT STUDIO KIT - In Stock Now!
Your new camera assistant has finally arrived. The Orbit Studio Kit is ideal for the perfectionist that needs to have the absolute best lighting for their shoot. The included battery powered light ring mounts to Orbit and features a magnetic moon ball that can help you find proper focus to film yourself and a crosshair laser that helps you find perfect center. Get ready to take your next interview, audition reel, product shoot or scene to the next level.
Key features
-Complete kit, camera movement and lighting.
-Controlled by IR Remote or Web based App
-CRI97+ LED Light ring, great on skin tones and products.
-Light Ring helps solo shooters nail focus, and find perfect center for parallax, with magnetic focus ball.
Included in the Kit
Base Kit Included
(1) Axibo Powered Stealth Motor.
- Internal 6700mAh battery.
- 8 hour run time.
- Max 10 RPM / Min 1 Rotation per 48 hours.
- Machined and welded motor shaft, vertical weight tested over 200 lbs.
(1) Ceiling Plate with hardware assembly. Mounts into Studs/ joists, or cement ceilings. Includes screws.
(1) Telescoping Down Rod. Attaches to ceiling Plate and to Orbit Motor with an adjustable hight of 27” - 46” . Ideal use for ceilings 8-12’
(2) Kondor Blue Arm joints. Anodized 6160-t6 aluminum, with arri rosette steel teeth.
(4) Anodized Black aluminum arm poles. (2) 24” and (2) 16 inch. Total span across when assembled 94”.
(2) Threaded end caps with 1/4-20 mounting for accessories or counter weights. Caps thread into arm poles.
(1) Dual Arm receiver. Includes bubble level for proper weight distribution.
(3) 1 lbs counter weights. 1/4-20 threaded, stainless steel construction.
(1) Ball Head to cold Shoe mount. Fits to normal DSLR or Mirrorless cameras such as Sony, Canon, Panasonic.
(1) 1/4-20 to Cold Shoe Mount. Mounts to any camera with 1/4-20 mount, and creates a quick release cold shoe.
(1) Bar Sleeve. 1/4-20 mount, attaches to ball head and camera.
(2) Hook and loop wall anchors for leveling down rod.
(2) 1/4-20 threaded loops. Used for attaching ratchet straps and straightening down rod, (if needed).
(2) Ratchet straps. 75 LBS max payload.
(1) Aluminum IR Remote control + APP (App release summer 2022)
Studio Kit Included
(1) Studio Ring Light
-5600k Daylight LEDS.
-Diffused and dimmable, CRI 97+ LEDS. Good on products and Skintones.
- Laser guide for finding perfect center of orbit.
-Internal 6700 mAh battery bank. USB-C quick charge or reverse charge to use as battery bank.
-7 hour battery life @ 50%v brightness. 3.5 hour battery life @ 50% brightness.
- 32 Step encoder for brightness, 5 step remote brightness.
-Tool holder + Magnetic remote holder
(1) Magnetic Focus Ball. Pull focus for yourself or use to set exposure with near 18% grey moon ball.
Motor Modes Explained
Product Mode, visor Green. Max speed, 10RPM. Very fast Orbits, great for slow motion shots.
Interview mode, visor yellow. Slower than green mode, 1/10 RPM, ideal for interviews or for slow product shots with long lenses.
Time lapse mode, visor teal. Very slow gear, 1 rotation every 48 hours, great for shadows play time lapse or plants growing etc..
Stop Motion Mode, visor blue. Orbit only moves when given instructions to do so, moves in degrees.
Wiper Mode, visor blinks any color - Orbit jogs back and forth between two positions. Ideal for interviews with long lenses and low speeds.
VFX Mode. Orbit has built in speaker, and will blip exactly as each orbit concludes. Ideal for stacking and performing movie magic.
V-mount batteries are NOT included in any package. Orbit base, Studio, and Pro may require installation into a ceiling stud. For best results, use a stud finder and screw gun. These are NOT included as well. Outdoor mounting requires appropriately sized overhead stand, a dual speed rail assembly, and additional safety equipment, which are NOT included.
+FREE SHIPPING USA
International and expedited shipping options are available at checkout.
Estimated Domestic delivery time is 5-7 business days.
Estimated International delivery time: Up to 14 days
International orders from outside the U.S. will ship from factory direct and will require an air shipping fee. All taxes and duties on international orders will need to be paid by the buyer at time of delivery.
Please keep in mind that international customers are required to pay collect on taxes and duties. Click here for more information.
ORBIT STUDIO KIT - In Stock Now!
Your new camera assistant has finally arrived. The Orbit Studio Kit is ideal for the perfectionist that needs to have the absolute best lighting for their shoot. The included battery powered light ring mounts to Orbit and features a magnetic moon ball that can help you find proper focus to film yourself and a crosshair laser that helps you find perfect center. Get ready to take your next interview, audition reel, product shoot or scene to the next level.
Key features
-Complete kit, camera movement and lighting.
-Controlled by IR Remote or Web based App
-CRI97+ LED Light ring, great on skin tones and products.
-Light Ring helps solo shooters nail focus, and find perfect center for parallax, with magnetic focus ball.
Included in the Kit
Base Kit Included
(1) Axibo Powered Stealth Motor.
- Internal 6700mAh battery.
- 8 hour run time.
- Max 10 RPM / Min 1 Rotation per 48 hours.
- Machined and welded motor shaft, vertical weight tested over 200 lbs.
(1) Ceiling Plate with hardware assembly. Mounts into Studs/ joists, or cement ceilings. Includes screws.
(1) Telescoping Down Rod. Attaches to ceiling Plate and to Orbit Motor with an adjustable hight of 27” - 46” . Ideal use for ceilings 8-12’
(2) Kondor Blue Arm joints. Anodized 6160-t6 aluminum, with arri rosette steel teeth.
(4) Anodized Black aluminum arm poles. (2) 24” and (2) 16 inch. Total span across when assembled 94”.
(2) Threaded end caps with 1/4-20 mounting for accessories or counter weights. Caps thread into arm poles.
(1) Dual Arm receiver. Includes bubble level for proper weight distribution.
(3) 1 lbs counter weights. 1/4-20 threaded, stainless steel construction.
(1) Ball Head to cold Shoe mount. Fits to normal DSLR or Mirrorless cameras such as Sony, Canon, Panasonic.
(1) 1/4-20 to Cold Shoe Mount. Mounts to any camera with 1/4-20 mount, and creates a quick release cold shoe.
(1) Bar Sleeve. 1/4-20 mount, attaches to ball head and camera.
(2) Hook and loop wall anchors for leveling down rod.
(2) 1/4-20 threaded loops. Used for attaching ratchet straps and straightening down rod, (if needed).
(2) Ratchet straps. 75 LBS max payload.
(1) Aluminum IR Remote control + APP (App release summer 2022)
Studio Kit Included
(1) Studio Ring Light
-5600k Daylight LEDS.
-Diffused and dimmable, CRI 97+ LEDS. Good on products and Skintones.
- Laser guide for finding perfect center of orbit.
-Internal 6700 mAh battery bank. USB-C quick charge or reverse charge to use as battery bank.
-7 hour battery life @ 50%v brightness. 3.5 hour battery life @ 50% brightness.
- 32 Step encoder for brightness, 5 step remote brightness.
-Tool holder + Magnetic remote holder
(1) Magnetic Focus Ball. Pull focus for yourself or use to set exposure with near 18% grey moon ball.
Motor Modes Explained
Product Mode, visor Green. Max speed, 10RPM. Very fast Orbits, great for slow motion shots.
Interview mode, visor yellow. Slower than green mode, 1/10 RPM, ideal for interviews or for slow product shots with long lenses.
Time lapse mode, visor teal. Very slow gear, 1 rotation every 48 hours, great for shadows play time lapse or plants growing etc..
Stop Motion Mode, visor blue. Orbit only moves when given instructions to do so, moves in degrees.
Wiper Mode, visor blinks any color - Orbit jogs back and forth between two positions. Ideal for interviews with long lenses and low speeds.
VFX Mode. Orbit has built in speaker, and will blip exactly as each orbit concludes. Ideal for stacking and performing movie magic.
V-mount batteries are NOT included in any package. Orbit base, Studio, and Pro may require installation into a ceiling stud. For best results, use a stud finder and screw gun. These are NOT included as well. Outdoor mounting requires appropriately sized overhead stand, a dual speed rail assembly, and additional safety equipment, which are NOT included.
+FREE SHIPPING USA
International and expedited shipping options are available at checkout.
Estimated Domestic delivery time is 5-7 business days.
Estimated International delivery time: Up to 14 days
International orders from outside the U.S. will ship from factory direct and will require an air shipping fee. All taxes and duties on international orders will need to be paid by the buyer at time of delivery.
Please keep in mind that international customers are required to pay collect on taxes and duties. Click here for more information.
ORBIT STUDIO KIT - In Stock Now!
Your new camera assistant has finally arrived. The Orbit Studio Kit is ideal for the perfectionist that needs to have the absolute best lighting for their shoot. The included battery powered light ring mounts to Orbit and features a magnetic moon ball that can help you find proper focus to film yourself and a crosshair laser that helps you find perfect center. Get ready to take your next interview, audition reel, product shoot or scene to the next level.
Key features
-Complete kit, camera movement and lighting.
-Controlled by IR Remote or Web based App
-CRI97+ LED Light ring, great on skin tones and products.
-Light Ring helps solo shooters nail focus, and find perfect center for parallax, with magnetic focus ball.
Included in the Kit
Base Kit Included
(1) Axibo Powered Stealth Motor.
- Internal 6700mAh battery.
- 8 hour run time.
- Max 10 RPM / Min 1 Rotation per 48 hours.
- Machined and welded motor shaft, vertical weight tested over 200 lbs.
(1) Ceiling Plate with hardware assembly. Mounts into Studs/ joists, or cement ceilings. Includes screws.
(1) Telescoping Down Rod. Attaches to ceiling Plate and to Orbit Motor with an adjustable hight of 27” - 46” . Ideal use for ceilings 8-12’
(2) Kondor Blue Arm joints. Anodized 6160-t6 aluminum, with arri rosette steel teeth.
(4) Anodized Black aluminum arm poles. (2) 24” and (2) 16 inch. Total span across when assembled 94”.
(2) Threaded end caps with 1/4-20 mounting for accessories or counter weights. Caps thread into arm poles.
(1) Dual Arm receiver. Includes bubble level for proper weight distribution.
(3) 1 lbs counter weights. 1/4-20 threaded, stainless steel construction.
(1) Ball Head to cold Shoe mount. Fits to normal DSLR or Mirrorless cameras such as Sony, Canon, Panasonic.
(1) 1/4-20 to Cold Shoe Mount. Mounts to any camera with 1/4-20 mount, and creates a quick release cold shoe.
(1) Bar Sleeve. 1/4-20 mount, attaches to ball head and camera.
(2) Hook and loop wall anchors for leveling down rod.
(2) 1/4-20 threaded loops. Used for attaching ratchet straps and straightening down rod, (if needed).
(2) Ratchet straps. 75 LBS max payload.
(1) Aluminum IR Remote control + APP (App release summer 2022)
Studio Kit Included
(1) Studio Ring Light
-5600k Daylight LEDS.
-Diffused and dimmable, CRI 97+ LEDS. Good on products and Skintones.
- Laser guide for finding perfect center of orbit.
-Internal 6700 mAh battery bank. USB-C quick charge or reverse charge to use as battery bank.
-7 hour battery life @ 50%v brightness. 3.5 hour battery life @ 50% brightness.
- 32 Step encoder for brightness, 5 step remote brightness.
-Tool holder + Magnetic remote holder
(1) Magnetic Focus Ball. Pull focus for yourself or use to set exposure with near 18% grey moon ball.
Motor Modes Explained
Product Mode, visor Green. Max speed, 10RPM. Very fast Orbits, great for slow motion shots.
Interview mode, visor yellow. Slower than green mode, 1/10 RPM, ideal for interviews or for slow product shots with long lenses.
Time lapse mode, visor teal. Very slow gear, 1 rotation every 48 hours, great for shadows play time lapse or plants growing etc..
Stop Motion Mode, visor blue. Orbit only moves when given instructions to do so, moves in degrees.
Wiper Mode, visor blinks any color - Orbit jogs back and forth between two positions. Ideal for interviews with long lenses and low speeds.
VFX Mode. Orbit has built in speaker, and will blip exactly as each orbit concludes. Ideal for stacking and performing movie magic.
V-mount batteries are NOT included in any package. Orbit base, Studio, and Pro may require installation into a ceiling stud. For best results, use a stud finder and screw gun. These are NOT included as well. Outdoor mounting requires appropriately sized overhead stand, a dual speed rail assembly, and additional safety equipment, which are NOT included.
+FREE SHIPPING USA
International and expedited shipping options are available at checkout.
Estimated Domestic delivery time is 5-7 business days.
Estimated International delivery time: Up to 14 days
International orders from outside the U.S. will ship from factory direct and will require an air shipping fee. All taxes and duties on international orders will need to be paid by the buyer at time of delivery.
